Samyo 3 Channels DMX-512 Decoder Controller Dimmer for RGB LED Strip Lamp Light

Dimmer Switches

Samyo 3 Channels DMX-512 Decoder Controller Dimmer for RGB LED Strip Lamp Light

Posted On October 11, 2015 at 11:45 am by bulbadmin / No Comments

Samyo 3 Channels DMX-512 Decoder Controller Dimmer for RGB LED Strip Lamp Light

Product Features

Receive standard DMX-512 digital control signal and transformed it into PWM signal for driving LED.
Can connected with numbers of DMX Decoder to increase the output power to realize all kinds of changing mode.
Can also be used as the synchronous controller to controlled the LED alone,it can realize the synchronous effects.
Easy to use. Each DMX common controller occupied 3 DMX address, DMX address can be set through dip switch.
Input voltage: DC12~24V. 3 output channels, 4 amps per channel.

Product Description

DMX decoder adopts the advanced micro control unit, it receives standard DMX-512 digital control signal and transformed it into PWM signal for driving lED; You could connect DMX module with DMX digital console to achieve dimming or various changes in procedures.This decoder adopt the digital tube to show the address code,and with 3 buttons to setting,make it more easy to used.

Parameters:
Working temperature: -20-60°C
Supply voltage: 5V, 12-24V can choose
Output: 3 channel
External dimension: L165*W68*H40(mm)
Packing size: L180*W95*H60(mm)
Net weight: 320g
Gross weight: 355g
Output current: 4A/ch
Output power: 5V:<60W, 12V:<144W, 24V:<288W

How to use?

DMX address code settings:
Each DMX common controller occupied 3 DMX addresses, adopt coding switch set address, it is a Binary numerical code switch which is setting DMX original address code from 1 to 9, 1 is the lowest, and 9 is the highest, 511 address codes could be set in all. DMX original address code equal aggregate value of the coding switch value from 1 to 9, dial the coding switch downwards(ON is set 1), the value of bit can be gotten, on the contrary, the value of bit is 0.
DMX signal can be received when coding switch FUN(10)=OFF(ON is set 0)